When installing the industrial filter cloth, it should be noted that there is no foreign matter or large sludge particles between the industrial filter cloth and the filter plate. The large sludge particles or foreign matter may cause damage to the filter plate or industrial filter cloth when the plates are closed. Spare industrial filter cloth should be stored in a cool and boring place, and dark shade cloth should be used to protect it from ultraviolet radiation and the aging of filter cloth material. Attention should be paid to the front and back of industrial filter cloth installation. Generally, the cloth of filter cloth faces mud without special requirements. Otherwise, the filter cloth will be easily blocked and the filtering power will be low.

When installing industrial filter cloth, do not lock the filter cloth too tightly with retaining ring, otherwise the sludge remaining in the filter cloth at the pressing contact position of the filter plate will not be automatically cleaned and removed. The pressing contact part of the filter plate around the industrial filter cloth should be smooth; There is no foreign matter between the filter cloth and the filter plate; Prevent the buckle tail from damaging the filter cloth; Pay attention to the front and back of industrial filter cloth device; Do not lock the filter cloth too tightly with retaining ring; Spare filter cloth should be stored in a cool and boring place; Before installing filter cloth, it is necessary to install filter cloth first.

When measuring industrial filter cloth, we should pay attention to the fact that the braided rope is working with the filter cloth, and one end of the braided rope is slightly stressed when working with the filter cloth, so as to make the braided rope taut, otherwise the measured length error is relatively large, so pay attention not to neglect the length of the metal joint, which should be counted in the length of the filter belt when measuring. To prevent the buckle tail from being too long, which may extend into some filter plates and damage the filter cloth, or form mud leakage, the short tail should be cut off.